www.esky-sh.com

ok. we will have a test as soon as it returned. i have succeeded to get it allmost working now, it took seven (7 sic) format attempts to get it go trough the drill, and now there is something funny bout the flash partitions. Driver 'sd' needs updating - please use bus_type methods S3C24XX NAND Driv...

it started on first day of use, and that was about 2 weeks ago.

programmed again norflash (I had programmed the nor with ftp directory mini20090723/images/linux/supervivi-64M on saturday) the vivi outpul looks like the image you attached to this rar archive, so I thought it is the same binary i checked verifying the two binaries and H-Jtag verified them in 23sec...

thanks I tried it (I assume the idea was to flash it ti NAND
from supervivi first X then V then K then J failed in J phase on same sector.

I will try flashing it to the NOR as well since I still have some time the printerported XP machine here.

What does make this board so expensive, compared to the Mini2440 ? I would also know, why it is so much more expensive ? the ebay auction: http://cgi.ebay.com/Atmel-AT91SAM9263-ARM926EJ-S-ARM9-ARM-Development-Board_W0QQitemZ110420200080QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item19b58e8a90&_trks...

I was checking with our engineers for the S/W configurations. I will update you here soon. Im all ears for any reasonable ideas to get the board working from the Hynix Flash that is soldered to it. If you could guarantee, that I can buy from you a board with Samsung NAND Flash (as pictured in your ...

I used H-JTAG as the JFS is trickier to use due to driver loading needs. now with a parallelport pc i programmed the supervivi-64 into norflash using H-JTAG v0.9.1 to NOR the norflash type was reported as SST39VF1601 0x234B00BF veriified ok size 250.3Kb then booted in nor position loaded supervivi64...

another solution would be havinf ATA interface in the memory bus: http://www.simtec.co.uk/products/EB2410ITX/ this design implements IDE by a FPGA or actually CPLD, a kind of bunch of GALs/PALs : http://www.simtec.co.uk/products/EB2410ITX/detailed-block-med.png then question is: how to implement ATA...

SDHC flash maximum capacity(4G/16G/32G) you can afford at highest speed they sell(50x/66x/100x?) might be 10 times faster than USB1.1 at full speed. SD interface spec if i remember right is 4bit wide spi clocked at 25MHz resulting 100MHz half duplex. 100baseTX is 100Mbit full duplex, allthough for d...

there are two pieces of software to test key input, you seem to refer to the linux variant: judging from the c sourcecode buttons_test in somewhere like: friendlyarm_dvd\linux example code\examples the buttons are handled by /dev/buttons device driver /dev is defined in kernel, so i assume that kern...