Hi,
Please go ahead to upgrade your PC to Windows XP, since I always use DNW tool under Windows XP to flash S3C22440 board. I will check with this VISTA issue for DNW tool.
Thanks for broadcasting us.
Search found 534 matches
- Thu Dec 25, 2008 1:10 am
- Forum: S3C2440 Boards
- Topic: Flashing issues with VIVI and Windows tool
- Replies: 6
- Views: 2368
- Tue Dec 23, 2008 6:00 pm
- Forum: Linux Development
- Topic: building toolchain step by step
- Replies: 0
- Views: 4913
- Tue Dec 23, 2008 5:34 pm
- Forum: Real Time Programming
- Topic: The 0x10 Best Questions for Would-be Embedded Programmers
- Replies: 1
- Views: 7719
The 0x10 Best Questions for Would-be Embedded Programmers
A 'C' Test: The 0x10 Best Questions for Would-be Embedded Programmers Nigel Jones Pencils up, everyone. Here's a test to identify potential embedded programmers or embedded programmers with potential A n obligatory and significant part of the recruitment process for embedded systems programmers see...
- Mon Dec 22, 2008 4:36 pm
- Forum: S3C2440 Boards
- Topic: Replacing Vivi with Uboot
- Replies: 4
- Views: 2151
Re: Replacing Vivi with Uboot
Hi, There is U-Boot source code for this mini2440 board on CD-ROMs. I believe the code was modified based on U-Boot snapshot 1.1.6. You can start your work on that. Here are some features of this U-Boot: 1). Support S3C2410 and S3C2440 2). Support xmodem protocol 3). Support DNW usb downloading 4). ...
- Sat Dec 20, 2008 8:55 pm
- Forum: S3C2440 Boards
- Topic: [Kernel Patch]2.6.13 Camera I/F Exception
- Replies: 0
- Views: 1224
[Kernel Patch]2.6.13 Camera I/F Exception
Wrong interrupt number assigned in Kernel 2.6.13: Index: kernel-2.6.13/arch/arm/mach-s3c2410/s3c2440-irq.c =================================================================== --- kernel-2.6.13.orig/arch/arm/mach-s3c2410/s3c2440-irq.c 2008-12-11 17:31:25.000000000 +0800 +++ kernel-2.6.13/arch/arm/mac...
- Sat Dec 20, 2008 8:48 pm
- Forum: S3C2440 Boards
- Topic: How to mount USB Mass Storage Device under Linux
- Replies: 1
- Views: 1495
How to mount USB Mass Storage Device under Linux
Assume USB Disk is in FAT32 Following messages will appear after USB Disk plug in: SCSI device sda: 2000561 512-byte hdwr sectors (1024 MB) sda: Write Protect is off sda: assuming drive cache: write through SCSI device sda: 2000561 512-byte hdwr sectors (1024 MB) sda: Write Protect is off sda: assu...
- Sat Dec 20, 2008 8:41 pm
- Forum: Linux Development
- Topic: Linux development resources
- Replies: 0
- Views: 4707
Linux development resources
ARM Linux Kernel 1. The ARM Linux Project site: http://www.arm.linux.org.uk/ - maillist: http://www.arm.linux.org.uk/mailinglists/lists.php Linux Kernel Source Code 1. Linux Kernel development tree [git] http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=summary 2. Linux k...
- Sat Dec 20, 2008 8:35 pm
- Forum: WinCE Development
- Topic: How to build WinCE 5.0 and export SDK
- Replies: 0
- Views: 2493
How to build WinCE 5.0 and export SDK
Assume Platform Builder5.0 installed on default folder 1. Open C:\WINCE500\PLATFORM Make new folder SMDK2440 Copy SMDK package to new created folder SMDK2440, remove read only attribute for folders 2. Open C:\WINCE500\PUBLIC Make new folder QQ2440 Copy *.pbxml on CD-ROMs to new created folder QQ2440...
- Sat Dec 20, 2008 8:18 pm
- Forum: S3C2440 Boards
- Topic: How to build U-Boot-1.1.6 on CD-ROMs
- Replies: 0
- Views: 1395
How to build U-Boot-1.1.6 on CD-ROMs
1. check correct cross complier installed -- arm-linux-gcc-3.4.1
2. untar uboot package
3. make distclean
4. make <board_type>_config
5. make all
2. untar uboot package
3. make distclean
4. make <board_type>_config
5. make all
- Sat Dec 20, 2008 8:15 pm
- Forum: S3C2440 Boards
- Topic: How to configure H-JTAG for S3C2440 board
- Replies: 2
- Views: 2970
How to configure H-JTAG for S3C2440 board
1. Copy FrendlyARM2440.his and H-Flasher_QQ2440.hfc files to H-JTAG installation folder
2. Make JTAG Port pin assignment
3. Run init script
4. Detect target CPU