Hi all,
I have successfully got the mini2440 running from NOR, but when I try to boot from NAND all I get is a very white screen, there is nothing from the console. I am assuming the board is not booting up any advise is welcome.
Board is a 256mb model with T35 lcd if this helps!
thanks in advance.
White Screen Novice needing assist
Re: White Screen Novice needing assist
I have the same problem.
Linux and WINCE6 work in 256mb board but WINCE5 run just first time when the switch is in the NOR position.
I have 128mb and 1Gb boards and these boards don't have this problem with wince5.
Linux and WINCE6 work in 256mb board but WINCE5 run just first time when the switch is in the NOR position.
I have 128mb and 1Gb boards and these boards don't have this problem with wince5.
Re: White Screen Novice needing assist
you can use 'x', 'v' and 'w' command for wince installation on nand flash.
Who is online
Users browsing this forum: No registered users and 31 guests