White Screen Novice needing assist

Post Reply
marke
Posts: 1
Joined: Mon May 10, 2010 1:40 pm

White Screen Novice needing assist

Post by marke » Mon May 17, 2010 7:52 am

Hi all,

I have successfully got the mini2440 running from NOR, but when I try to boot from NAND all I get is a very white screen, there is nothing from the console. I am assuming the board is not booting up any advise is welcome.

Board is a 256mb model with T35 lcd if this helps!

thanks in advance.

Abuda
Posts: 7
Joined: Fri Dec 25, 2009 4:21 am

Re: White Screen Novice needing assist

Post by Abuda » Wed Jun 09, 2010 4:48 pm

I have the same problem.

Linux and WINCE6 work in 256mb board but WINCE5 run just first time when the switch is in the NOR position.

I have 128mb and 1Gb boards and these boards don't have this problem with wince5.

esky-sh
Posts: 1438
Joined: Sat Dec 20, 2008 4:21 am

Re: White Screen Novice needing assist

Post by esky-sh » Thu Jun 17, 2010 6:34 pm

you can use 'x', 'v' and 'w' command for wince installation on nand flash.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest