Usb camera

Post Reply
Delavar
Posts: 36
Joined: Mon Dec 22, 2008 12:03 pm
Contact:

Usb camera

Post by Delavar » Sun Jun 06, 2010 12:39 pm

Hi.
When I connect USB camera to working board - it starts to work. But when camera is already connected and board is powered on - camera doesn't work. I need to pull it out from USB and connect again. Any advice would be appreciated. I'm using kernel 2.6.29 and debian.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest