Wince downloading to mini2440 fault
Posted: Wed Mar 09, 2011 1:49 am
Hi all, I,m new in the forum and also in Wince and mini2440 development system, my board is a mini 2440 with 4,3" lcd.
I have installed the image for linux qtopia from the CD,and everything is fine, but ethernet doesn´t works
Later I have tried to install the Wince5 as follows:
-Boot from Nor flash
-Select option "x" Format NAND FLASH for Linux---------supervivi version 1026-2k, I have tried with "Format flash" option also
-Select "v" Download vivi--------------------------I select the supervivi-128M from CD
-Select "n" Download nboot for Wince-----I use a nboot.bin for 4,3" I found in "developmentboard.net" site.There is no file for 4,3" in CD
-Select "w" Download Wince NK.bin-------------------------I found a 4,3" image in "developmentboard.net" site, there is no image for 4,3" lcd in CD
The result is :
-in vivi menu appears Enter your selection:
w
Clear the free memory
Please send the Image through USB.
And the bar progress of DNW is all the time showing no progress.
I did a test, just directly try to donwload the NK.bin with option "w", and the result is the same.
I have tried also nboot.bin and NK.bin from the CD, even for differents LCD sizes, with the same result.
It seems the problem is the supervivi bootloader in NOR doesn´t like the Wince image
I,m getting alot of problems ,could you help me please?
Thanks in advance
I have installed the image for linux qtopia from the CD,and everything is fine, but ethernet doesn´t works
Later I have tried to install the Wince5 as follows:
-Boot from Nor flash
-Select option "x" Format NAND FLASH for Linux---------supervivi version 1026-2k, I have tried with "Format flash" option also
-Select "v" Download vivi--------------------------I select the supervivi-128M from CD
-Select "n" Download nboot for Wince-----I use a nboot.bin for 4,3" I found in "developmentboard.net" site.There is no file for 4,3" in CD
-Select "w" Download Wince NK.bin-------------------------I found a 4,3" image in "developmentboard.net" site, there is no image for 4,3" lcd in CD
The result is :
-in vivi menu appears Enter your selection:
w
Clear the free memory
Please send the Image through USB.
And the bar progress of DNW is all the time showing no progress.
I did a test, just directly try to donwload the NK.bin with option "w", and the result is the same.
I have tried also nboot.bin and NK.bin from the CD, even for differents LCD sizes, with the same result.
It seems the problem is the supervivi bootloader in NOR doesn´t like the Wince image
I,m getting alot of problems ,could you help me please?
Thanks in advance