-
Harborseal
- Posts: 9
- Joined: Wed Apr 22, 2009 1:23 am
- Location: USA
-
Contact:
Post
by Harborseal » Tue Aug 25, 2009 10:17 pm
lkernan wrote:i've got the 120 day evaluation version of ce 6.0 from microsoft. Came on 2 dvds with an eval copy of visual studio 2005 pro.
I used the new ce 5 bsp from friendlyarm. It loads straight into the ce 6 environment if you create a catalog file for it.
Any luck with the 6.0?
-
lkernan
- Posts: 9
- Joined: Sun Apr 05, 2009 6:26 pm
Post
by lkernan » Wed Aug 26, 2009 5:50 pm
Afraid not, I got it to load into the platform builder, but there were parts of the code (usb and display that i noticed) that need updating for CE6.0.
I'm not a c or driver programmer so i left it at that.
I haven't been able to get a working image in either CE5 or 6 from the latest BSP yet.
-
Harborseal
- Posts: 9
- Joined: Wed Apr 22, 2009 1:23 am
- Location: USA
-
Contact:
Post
by Harborseal » Sun Aug 30, 2009 9:20 pm
Bummer. I've asked Yang Bing at FriendlyARM if he can compile an English run-time. If he did the Chinese, he should be able to whip out an English version with ease.
-
pub20
- Posts: 15
- Joined: Mon Nov 30, 2009 3:53 am
- Location: Ukraine, Ivano-Frankivs
Post
by pub20 » Mon Nov 30, 2009 5:34 am
how anyone sny success with this problem. I have builded WINCE 6.0 image but have problems with its installing and running. Can anyone help me, if so write to
vitallikorolyk@gmail.com
-
nicolas
- Posts: 162
- Joined: Sun Jun 07, 2009 4:32 pm
Post
by nicolas » Tue Dec 01, 2009 9:01 pm
I went thru the source drivers, it seems legitimate.
The sample applications are even more amazing - they show off all the hardware in wince, even the camera.
(I have not actually tried a WinCE6 image - just from the files)
Ive re-uploaded the .rar file here
http://sharebee.com/b6b92441
-
pub20
- Posts: 15
- Joined: Mon Nov 30, 2009 3:53 am
- Location: Ukraine, Ivano-Frankivs
Post
by pub20 » Wed Dec 02, 2009 7:29 am
Hi.
I have tried out that BSP. Seems to work fine. But I have one problem - when I download OS Image using DNW it boots, after reseting device - after reseting device and putting S2 to NAND it fails to start.
Am I doing something wrong? There are supervivi-128M at archive - need I to update bios?
-
spinbot
- Posts: 8
- Joined: Sat Jul 25, 2009 5:07 am
Post
by spinbot » Wed Dec 02, 2009 4:45 pm
I'm having the same problem. It works straight after flash (when still on NOR) but doesn't start after a reset into NAND.
-
spinbot
- Posts: 8
- Joined: Sat Jul 25, 2009 5:07 am
Post
by spinbot » Wed Dec 02, 2009 5:18 pm
Ok, I flashed the NOR with JTAG with the new vivi (the one included with the new CE6 files) and it works!!!
FINALLY!
Windows CE 6 on the mini2440!!!!
-
pub20
- Posts: 15
- Joined: Mon Nov 30, 2009 3:53 am
- Location: Ukraine, Ivano-Frankivs
Post
by pub20 » Thu Dec 03, 2009 1:10 am
I tried to update vivi without JTAG - nothing changed.
So I want to know how to flash NOR using JTAG? I just don't want to broken my board if something goes wrong/
After flashing have you made any changes on BIOS like partition or something else?
Can you write howto on flashing NOR and installing WINCE 6.0?
Who is online
Users browsing this forum: No registered users and 7 guests