Page 2 of 3
Re: BeagleBoard Rev C4 and 7" TFT LCD frame + touch
Posted: Tue Oct 25, 2011 2:14 am
by esky-sh
matt13 wrote:thanks hanh96_clone,
can you tell me about what must be changed in the. config.
I saw we need to activate McSPI driver for OMAP24xx/OMAP34xx in the SPI support.
can you confirm that?
if you have a patch, could you post it here to help also other users who'll need to make these changes?
thanks a lot
Hi,
The config template file is \arch\arm\configs\omap3_beagle_exp_defconfig
Re: BeagleBoard Rev C4 and 7" TFT LCD frame + touch
Posted: Tue Oct 25, 2011 5:20 am
by matt13
hi,
me too i try to use the touchscreen on gingerbread
i saw this file but we don't need all of theses settings?
Re: BeagleBoard Rev C4 and 7" TFT LCD frame + touch
Posted: Wed Oct 26, 2011 12:07 am
by hanh96_clone
You should read elinux.org/BeagleBoard/SPI ,
http://processors.wiki.ti.com/index.php ... tingGuides
for more details.
I tried to create a patch but got some errors, hope can fix soon and share for others ^^.
Re: BeagleBoard Rev C4 and 7" TFT LCD frame + touch
Posted: Wed Oct 26, 2011 1:49 am
by matt13
thank you,
I had already looked at this page.
But I still can not use the touchscreen
I wait with impatience the patch to see where my mistakes are
Re: BeagleBoard Rev C4 and 7" TFT LCD frame + touch
Posted: Thu Oct 27, 2011 2:25 am
by hanh96_clone
Here is the patch:
http://bit.ly/touchScreenPatch
and the tutorial is here (
http://bit.ly/sk4t3Q) , hope it useful for you. Good luck
Re: BeagleBoard Rev C4 and 7" TFT LCD frame + touch
Posted: Thu Oct 27, 2011 5:07 am
by esky-sh
Great job!
Could you share us with some pictures for Android GB on Beada Frame?
Re: BeagleBoard Rev C4 and 7" TFT LCD frame + touch
Posted: Thu Oct 27, 2011 9:21 am
by hanh96_clone
Do you mean pictures for this touchscreen and Android GingerBread ?
Re: BeagleBoard Rev C4 (Android 2.3.4) works with 7" TFT LCD
Posted: Wed Nov 09, 2011 8:19 pm
by hanh96_clone
Images updated at #1 post
Re: BeagleBoard Rev C4 (Android 2.3.4) works with 7" TFT LCD
Posted: Wed Nov 09, 2011 10:40 pm
by esky-sh
hanh96_clone wrote:Images updated at #1 post
Thanks, we would like more customers have a test with your porting. Could you post a uImage file?
Re: BeagleBoard Rev C4 (Android 2.3.4) works with 7" TFT LCD
Posted: Fri Nov 11, 2011 8:39 pm
by hanh96_clone
Here's the uImage and boot.scr ( in case you haven't set uboot to boot from DVI)
http://bit.ly/urb5LV