Could you explain more on your works of linaro tracking branch? I make same changes as yours and first time I boot the board, a message 'Unfortunately, UI does not start" appear on screen, I reboot the board and then screen stuck on 'Android' logo forever...
Code: Select all
U-Boot SPL 2011.12 (Jan 23 2012 - 06:10:01)
Texas Instruments OMAP4430 ES2.1
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.12 (Jan 23 2012 - 06:10:01)
CPU : OMAP4430 ES2.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
WARNING: Caches not enabled
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
reading uEnv.txt
** Unable to read "uEnv.txt" from mmc 0:1 **
reading boot.scr
449 bytes read
Loaded script from boot.scr
Running bootscript from mmc0 ...
## Executing script at 82000000
reading uImage
4359680 bytes read
reading uInitrd
165635 bytes read
## Booting kernel from Legacy Image at 80200000 ...
Image Name: Linux-3.2.0-rc7
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4359616 Bytes = 4.2 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
Image Name: Android Ramdisk Image
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 165571 Bytes = 161.7 KiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.2.0-rc7 (root@NX-W-3) (gcc version 4.6.3 20120105 (prerelse) (Linaro GCC 4.6-2012.01) ) #2 SMP PREEMPT Sun Feb 5 10:47:57 CST 201 2
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
[ 0.000000] Machine: OMAP4 Panda board
[ 0.000000] Reserving 50331648 bytes SDRAM for VRAM
[ 0.000000] cma: CMA: reserved 32 MiB at 9a000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e0808000 s10176 r8192 d14400 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 233216
[ 0.000000] Kernel command line: console=ttyO2,115200n8 rootwait ro earlyprin tk fixrtc nocompcache vram=48M omapfb.vram=0:24M,1:24M mem=456M@0x80000000 mem=5 12M@0xA0000000 init=/init androidboot.console=ttyO2
[ 0.000000]
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 456MB 463MB = 919MB total
[ 0.000000] Memory: 889008k/889008k available, 102224k reserved, 211968K high mem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07d0b28 (7971 kB)
[ 0.000000] .init : 0xc07d1000 - 0xc08117c0 ( 258 kB)
[ 0.000000] .data : 0xc0812000 - 0xc0872d70 ( 388 kB)
[ 0.000000] .bss : 0xc0872d70 - 0xc0a1d600 (1707 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 13 1071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000366] Calibrating delay loop... 1598.59 BogoMIPS (lpj=6242304)
[ 0.070373] pid_max: default: 32768 minimum: 301
[ 0.070587] Security Framework initialized
[ 0.070709] Mount-cache hash table entries: 512
[ 0.071411] CPU: Testing write buffer coherency: ok
[ 0.071655] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.071685] Calibrating local timer... 390.28MHz.
[ 0.117431] L310 cache controller enabled
[ 0.117462] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache si ze: 1048576 B
[ 0.194000] CPU1: Booted secondary processor
[ 0.224151] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.224151] CPU1: Unknown IPI message 0x1
[ 0.224182] Brought up 2 CPUs
[ 0.224212] SMP: Total of 2 processors activated (3152.07 BogoMIPS).
[ 0.224700] devtmpfs: initialized
[ 0.227722] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
[ 0.280700] omap_hwmod: mcpdm: _wait_target_ready: -16
[ 0.280700] ------------[ cut here ]------------
[ 0.280731] WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1509 _enable+0x1c8/0 x28c()
[ 0.280761] Modules linked in:
[ 0.280792] [<c0019c10>] (unwind_backtrace+0x0/0xf8) from [<c0042858>] (warn_ slowpath_common+0x4c/0x64)
[ 0.280822] [<c0042858>] (warn_slowpath_common+0x4c/0x64) from [<c004288c>] ( warn_slowpath_null+0x1c/0x24)
[ 0.280822] [<c004288c>] (warn_slowpath_null+0x1c/0x24) from [<c00227a0>] (_e nable+0x1c8/0x28c)
[ 0.280853] [<c00227a0>] (_enable+0x1c8/0x28c) from [<c0022c80>] (_setup+0xa0 /0x170)
[ 0.280853] [<c0022c80>] (_setup+0xa0/0x170) from [<c0022ed8>] (omap_hwmod_fo r_each+0x34/0x5c)
[ 0.280914] [<c0022ed8>] (omap_hwmod_for_each+0x34/0x5c) from [<c07dabe0>] (o map_hwmod_setup_all+0x6c/0x98)
[ 0.280914] [<c07dabe0>] (omap_hwmod_setup_all+0x6c/0x98) from [<c0008558>] ( do_one_initcall+0x34/0x174)
[ 0.280944] [<c0008558>] (do_one_initcall+0x34/0x174) from [<c07d189c>] (kern el_init+0x8c/0x12c)
[ 0.280975] [<c07d189c>] (kernel_init+0x8c/0x12c) from [<c0013e24>] (kernel_t hread_exit+0x0/0x8)
[ 0.281005] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.281005] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.284912] Enabling ERRATA 751472
[ 0.284942] OMAP4: Map 0xafe00000 to 0xfe600000 for dram barrier
[ 0.286010] print_constraints: dummy:
[ 0.288757] NET: Registered protocol family 16
[ 0.304626] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.305023] GPMC revision 6.0
[ 0.305084] mpu.0: alias fck already exists
[ 0.305541] iva.0: alias fck already exists
[ 0.307342] OMAP GPIO hardware version 0.1
[ 0.309570] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.310394] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.313171] SRAM: Mapped pa 0x40300000 to va 0xf0840000 size: 0xd000
[ 0.324371] OMAP DMA hardware revision 0.0
[ 0.342712] bio: create slab <bio-0> at 0
[ 0.343627] print_constraints: vwl1271: 1800 mV
[ 0.344635] i2c-core: driver [twl] using legacy suspend method
[ 0.344635] i2c-core: driver [twl] using legacy resume method
[ 0.345153] SCSI subsystem initialized
[ 0.346771] usbcore: registered new interface driver usbfs
[ 0.347015] usbcore: registered new interface driver hub
[ 0.347167] usbcore: registered new device driver usb
[ 0.361450] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
[ 0.362304] Skipping twl internal clock init and using bootloader value (unkn own osc rate)
[ 0.362731] twl6030: PIH (irq 39) chaining IRQs 368..387
[ 0.363250] print_constraints: VUSB: 3300 mV normal standby
[ 0.560272] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.561126] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal stan dby
[ 0.561614] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal stand by
[ 0.562133] print_constraints: VUSIM: 1200 <--> 2900 mV at 1800 mV normal sta ndby
[ 0.562713] print_constraints: VCXIO: 1800 mV normal standby
[ 0.563049] print_constraints: VDAC: 1800 mV normal standby
[ 0.563537] print_constraints: VAUX1_6030: 1000 <--> 3000 mV at 1800 mV norma l standby
[ 0.563568] twl_reg twl_reg.37: Failed to set supply vmmc
[ 0.563720] twl_reg twl_reg.37: can't register VAUX1_6030, -16
[ 0.563720] twl_reg: probe of twl_reg.37 failed with error -16
[ 0.564147] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV norma l standby
[ 0.564605] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV norma l standby
[ 0.564971] print_constraints: CLK32KG:
[ 0.565307] print_constraints: VANA: 2100 mV normal standby
[ 0.574859] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 100 kHz
[ 0.590087] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
[ 0.605316] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
[ 0.606262] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.607299] cfg80211: Calling CRDA to update world regulatory domain
[ 0.608245] Switching to clocksource 32k_counter
[ 0.633209] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.633758] NET: Registered protocol family 2
[ 0.633911] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.634399] TCP established hash table entries: 131072 (order: 8, 1048576 byt es)
[ 0.636291] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.637390] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.637390] TCP reno registered
[ 0.637390] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.637451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.637664] NET: Registered protocol family 1
[ 0.637939] RPC: Registered named UNIX socket transport module.
[ 0.637969] RPC: Registered udp transport module.
[ 0.637969] RPC: Registered tcp transport module.
[ 0.637969] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.638153] Trying to unpack rootfs image as initramfs...
[ 0.648742] Freeing initrd memory: 160K
[ 0.648773] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.829071] highmem bounce pool size: 64 pages
[ 0.829467] ashmem: initialized
[ 0.829742] VFS: Disk quotas dquot_6.5.2
[ 0.829864] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.831085] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.831359] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.831787] Btrfs loaded
[ 0.831787] msgmni has been set to 1386
[ 0.832641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 53)
[ 0.832672] io scheduler noop registered
[ 0.832672] io scheduler deadline registered
[ 0.832733] io scheduler cfq registered (default)
[ 0.835113] pwm_beada 2-0053: Rev.0 Backlight
[ 0.835937] OMAP DSS rev 4.0
[ 0.859466] dsscomp: initializing.
[ 0.859527] misc dsscomp: found 2 displays and 4 overlays
[ 0.859710] could not allocate slot
[ 0.859985] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.241363] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 1.366149] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 1.491119] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 2.387237] console [ttyO2] enabled
[ 2.475524] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 2.600708] PVR: PVRCore_Init
[ 2.604095] PVR: PVRSRVDriverProbe(pDevice=efe9b600)
[ 2.609405] PVR: SGX register base: 0x56000000
[ 2.614105] PVR: SGX register size: 65535
[ 2.618377] PVR: SGX IRQ: 53
[ 2.621429] PVR: EnableSystemClocks: Enabling System Clocks
[ 2.627410] voltdm_scale: No voltage scale API registered for vdd_core
[ 2.634338] pvrsrvkm pvrsrvkm.0: _dvfs_scale: Unable to scale the core to 120 0000 volt
[ 2.642730] pvrsrvkm pvrsrvkm.0: omap_device_scale: scale by pvrsrvkm.0 faile d -61[f=307200000, v=1200000]
[ 2.652984] PVR_K:(Error): EnableSGXClocks: Unable to scale SGX frequency (-6 1) [172, drivers/gpu/pvr/omap4/sysutils_linux.c]
[ 2.665100] voltdm_scale: No voltage scale API registered for vdd_core
[ 2.672027] pvrsrvkm pvrsrvkm.0: _dvfs_scale: Unable to scale the core to 102 5000 volt
[ 2.680419] pvrsrvkm pvrsrvkm.0: omap_device_scale: scale by pvrsrvkm.0 faile d -61[f=153600000, v=1025000]
[ 2.690643] PVR_K:(Error): EnableSGXClocks: Unable to scale SGX frequency (-6 1) [172, drivers/gpu/pvr/omap4/sysutils_linux.c]
[ 2.705383] PVR: PVRCore_Init: major device 251
[ 2.719055] brd: module loaded
[ 2.726867] loop: module loaded
[ 2.734100] usbcore: registered new interface driver asix
[ 2.739959] usbcore: registered new interface driver cdc_ether
[ 2.746307] usbcore: registered new interface driver smsc95xx
[ 2.752532] usbcore: registered new interface driver net1080
[ 2.758666] usbcore: registered new interface driver cdc_subset
[ 2.765075] usbcore: registered new interface driver zaurus
[ 2.770996] cdc_ncm: 04-Aug-2011
[ 2.774566] usbcore: registered new interface driver cdc_ncm
[ 2.780944] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.787994] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
[ 2.796844] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.803192] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numbe r 1
[ 2.811370] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 2.827026] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.833190] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.840393] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.848052] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.853668] usb usb1: Manufacturer: Linux 3.2.0-rc7 ehci_hcd
[ 2.859771] usb usb1: SerialNumber: ehci-omap.0
[ 2.865142] hub 1-0:1.0: USB hub found
[ 2.869171] hub 1-0:1.0: 3 ports detected
[ 2.897460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.904113] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
[ 2.910644] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus num ber 2
[ 2.918853] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
[ 3.002807] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.010009] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 3.017669] usb usb2: Product: OMAP3 OHCI Host Controller
[ 3.023406] usb usb2: Manufacturer: Linux 3.2.0-rc7 ohci_hcd
[ 3.029388] usb usb2: SerialNumber: ohci-omap3.0
[ 3.034851] hub 2-0:1.0: USB hub found
[ 3.038848] hub 2-0:1.0: 3 ports detected
[ 3.043670] usbcore: registered new interface driver cdc_wdm
[ 3.049713] Initializing USB Mass Storage driver...
[ 3.055084] usbcore: registered new interface driver usb-storage
[ 3.061462] USB Mass Storage support registered.
[ 3.066528] usbcore: registered new interface driver libusual
[ 3.194213] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 3.350860] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 3.357971] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.366241] hub 1-1:1.0: USB hub found
[ 3.370361] hub 1-1:1.0: 5 ports detected
[ 3.376037] usbcore: registered new interface driver usbtest
[ 3.382415] mousedev: PS/2 mouse device common for all mice
[ 3.389953] tsc-beada 2-0052: thread created: 645
[ 3.395172] input: ADS7846 Touchscreen as /devices/platform/omap/omap_i2c.2/i 2c-2/2-0052/input/input0
[ 3.406219] input: twl6040:vibrator as /devices/platform/omap/omap_i2c.1/i2c- 1/1-004b/twl6040/input/input1
[ 3.416870] _regulator_get: twl6040-vibra supply vddvibl not found, using dum my regulator
[ 3.425659] _regulator_get: twl6040-vibra supply vddvibr not found, using dum my regulator
[ 3.447570] using rtc device, rtc-beada, for alarms
[ 3.452575] rtc-ds1307 2-0051: rtc core: registered rtc-beada as rtc0
[ 3.459716] i2c /dev entries driver
[ 3.464324] Linux media interface: v0.10
[ 3.468872] lirc_dev: IR Remote Control driver registered, major 248
[ 3.475769] IR NEC protocol handler initialized
[ 3.480590] IR RC5(x) protocol handler initialized
[ 3.485717] IR RC6 protocol handler initialized
[ 3.490539] IR JVC protocol handler initialized
[ 3.495422] IR Sony protocol handler initialized
[ 3.500366] IR RC5 (streamzap) protocol handler initialized
[ 3.506317] IR LIRC bridge handler initialized
[ 3.511047] Linux video capture interface: v2.00
[ 3.516326] usbcore: registered new interface driver uvcvideo
[ 3.522430] USB Video Class driver (1.1.1)
[ 3.526947] dmm: probe base: fd300000, irq 145
[ 3.533538] Driver for 1-wire Dallas network protocol.
[ 3.540039] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[ 3.546752] cpuidle: using governor ladder
[ 3.551086] cpuidle: using governor menu
[ 3.557159] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dum my regulator
[ 3.568389] _regulator_get: omap_hsmmc.4 supply vmmc_aux not found, using dum my regulator
[ 3.647827] usbcore: registered new interface driver usbhid
[ 3.653717] usbhid: USB HID core driver
[ 3.658264] logger: created 256K log 'log_main'
[ 3.663238] logger: created 256K log 'log_events'
[ 3.668457] logger: created 256K log 'log_radio'
[ 3.673553] logger: created 256K log 'log_system'
[ 3.678833] thermal_governor_dev_register:Adding omap_ondie_governor governor
[ 3.686523] thermal_init_thermal_state:Not all components registered for cpu domain sensor (null), gov=efddf420, cooling= (null)
[ 3.699127] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[ 3.709197] SDP4430 SoC init
[ 3.741333] asoc: null-codec-dai <-> MultiMedia1 mapping ok
[ 3.748046] asoc: null-codec-dai <-> MultiMedia2 mapping ok
[ 3.755249] asoc: null-codec-dai <-> Voice mapping ok
[ 3.761566] asoc: null-codec-dai <-> Tones mapping ok
[ 3.767730] asoc: null-codec-dai <-> Vibra mapping ok
[ 3.773315] asoc: null-codec-dai <-> MODEM mapping ok
[ 3.778839] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
[ 3.786315] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 3.793457] asoc: twl6040-legacy <-> mcpdm-dl mapping ok
[ 3.799926] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok
[ 3.806457] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[ 3.812164] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[ 3.817687] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[ 3.823455] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[ 3.829132] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.836578] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 3.842498] mmc0: host does not support reading read-only switch. assuming wr ite-enable.
[ 3.851165] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0
[ 3.859130] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 3.865081] mmc0: new high speed SDHC card at address 1234
[ 3.871551] mmcblk0: mmc0:1234 SA04G 3.65 GiB
[ 3.876586] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 3.882965] smsc95xx v1.0.4
[ 3.883026] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
[ 3.891784] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok
[ 3.893920] mmcblk0: p1 p2 p3 p4 < p5 p6 >
[ 3.902679] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok
[ 3.909179] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok
[ 3.919433] input: Panda Headset Jack as /devices/platform/soc-audio.0/sound/ card0/input2
[ 3.932189] Error: Driver 'hdmi-audio-dai' is already registered, aborting...
[ 3.939788] OMAP4 HDMI audio SoC init
[ 3.944885] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
[ 3.960357] ALSA device list:
[ 3.963500] #0: TI OMAP4 Board
[ 3.966979] #1: TI OMAP4 HDMI Board
[ 3.970886] oprofile: hardware counters not available
[ 3.976287] oprofile: using timer interrupt.
[ 3.981018] TCP cubic registered
[ 3.984497] Initializing XFRM netlink socket
[ 3.989105] NET: Registered protocol family 17
[ 3.989440] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0- 1.1, smsc95xx USB 2.0 Ethernet, 2e:40:ce:ec:6c:0a
[ 4.005950] NET: Registered protocol family 15
[ 4.010772] lib80211: common routines for IEEE802.11 drivers
[ 4.016784] Registering the dns_resolver key type
[ 4.021789] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 4.029937] ThumbEE CPU extension supported.
[ 4.034484] Registering SWP/SWPB emulation handler
[ 4.036010] mmc1: card claims to support voltages below the defined range. Th ese will be ignored.
[ 4.051330] thermal_cooling_dev_register:Found cpu cpu
[ 4.056823] thermal_init_thermal_state:Not all components registered for cpu domain sensor (null), gov=efddf420, cooling=c082b1e4
[ 4.069671] Power Management for TI OMAP4.
[ 4.075744] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 4.082031] cma: CMA: reserved 32 MiB at ac000000
[ 4.090667] mmc1: new SDIO card at address 0001
[ 4.105499] omapfb omapfb: failed to apply dispc config
[ 4.116485] omapfb omapfb: failed to apply dispc config
[ 4.127471] omapfb omapfb: failed to apply dispc config
[ 4.133087] omapdss DPI: Could not find exact pixel clock. Requested 33000 kH z, got 33391 kHz
[ 4.670562] Console: switching to colour frame buffer device 100x60
[ 4.692230] regulator_init_complete: VANA: incomplete constraints, leaving on
[ 4.701171] regulator_init_complete: CLK32KG: incomplete constraints, leaving on
[ 4.712677] regulator_init_complete: VDAC: incomplete constraints, leaving on
[ 4.723876] regulator_init_complete: VUSB: incomplete constraints, leaving on
[ 4.742065] rtc-ds1307 2-0051: setting system clock to 2012-02-05 12:09:48 UT C (1328443788)
[ 4.751495] omap4iss omap4iss: Revision 40000101 found
[ 4.762268] ov5650 3-0036: Failed reading register 0x302a!
[ 4.762268] ov5650 3-0036: Failure to detect OV5650 chip
[ 4.774353] iss_register_subdev_group: Unable to register subdev ov5650
[ 4.782928] Freeing init memory: 256K
[ 5.148254] init: cannot open '/initlogo.rle'
[ 5.190887] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null)
[ 5.522125] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. O pts: (null)
[ 5.797363] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. O pts: (null)
[ 5.901000] init: cannot find '/system/etc/install-recovery.sh', disabling 'f lash_recovery'
[ 5.910736] init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit '
[ 5.919250] init: cannot find '/system/bin/uim', disabling 'uim'
[ 6.107727] (stk) :sysfs entries created
[ 6.111694] (stk) : debugfs entries created root@android:/ #
[ 6.445434] warning: `rild' uses 32-bit capabilities (legacy support in use)
[ 6.454986] Bluetooth: Core ver 2.16
[ 6.462402] NET: Registered protocol family 31
[ 6.467224] Bluetooth: HCI device and connection manager initialized
[ 6.474426] Bluetooth: HCI socket layer initialized
[ 6.479705] Bluetooth: L2CAP socket layer initialized
[ 6.483398] Bluetooth: SCO socket layer initialized
[ 6.600830] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.606842] Bluetooth: BNEP filters: protocol multicast
[ 6.693542] Bluetooth: HCI UART driver ver 2.2
[ 6.698669] Bluetooth: HCI H4 protocol initialized
[ 6.703887] Bluetooth: HCI BCSP protocol initialized
[ 6.709228] Bluetooth: HCILL protocol initialized
[ 6.812255] Bluetooth: RFCOMM TTY layer initialized
[ 6.814971] Bluetooth: RFCOMM socket layer initialized
[ 6.823455] Bluetooth: RFCOMM ver 1.11
[ 6.848175] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
[ 6.857574] (stc): st_register(4)
[ 6.858032] (stc): chnl_id list empty :4
[ 6.865875] (stk) : st_kim_start
[ 6.991607] (stk) :ldisc_install = 1
[ 7.026824] Disabling lock debugging due to kernel taint
[ 7.997253] (stk) :line disc installation timed out
[ 8.002471] (stk) :ldisc_install = 0
[ 9.194030] (stk) :ldisc_install = 1
[ 10.194305] (stk) :line disc installation timed out
[ 10.194305] (stk) :ldisc_install = 0
[ 11.355865] (stk) :ldisc_install = 1
[ 12.370117] (stk) :line disc installation timed out
[ 12.375457] (stk) :ldisc_install = 0
[ 13.500091] (stk) :ldisc_install = 1
[ 14.521331] (stk) :line disc installation timed out
[ 14.526855] (stk) :ldisc_install = 0
[ 15.627136] (stk) :ldisc_install = 1
[ 16.743194] (stk) :line disc installation timed out
[ 16.744354] (stk) :ldisc_install = 0
[ 17.914245] (stk) :ldisc_install = 1
[ 18.996398] (stk) :line disc installation timed out
[ 18.999420] (stk) :ldisc_install = 0
[ 20.102783] Bluetooth: st_register failed -22
[ 80.807373] er.ServerThread (1328): /proc/1313/oom_adj is deprecated, please use /proc/1313/oom_score_adj instead.
[ 85.244293] request_suspend_state: wakeup (3->0) at 85253234865 (2012-02-05 1 2:11:08.997100830 UTC)
[ 86.043365] init: no such service 'hciattach'
[ 86.043487] (stc): st_register(4)
[ 86.043518] (stc): chnl_id list empty :4
[ 86.043518] (stk) : st_kim_start
[ 86.231750] (stk) :ldisc_install = 1
[ 87.246215] (stk) :line disc installation timed out
[ 87.251647] (stk) :ldisc_install = 0
[ 88.457977] (stk) :ldisc_install = 1
[ 89.293548] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4D E1
[ 89.456726] (stk) :line disc installation timed out
[ 89.462036] (stk) :ldisc_install = 0
[ 90.534088] (stk) :ldisc_install = 1
[ 91.592681] (stk) :line disc installation timed out
[ 91.597930] (stk) :ldisc_install = 0
[ 92.747283] (stk) :ldisc_install = 1
[ 93.686584] (stk) :line disc installation timed out
[ 93.686614] (stk) :ldisc_install = 0
[ 94.800384] (stk) :ldisc_install = 1
[ 95.830780] (stk) :line disc installation timed out
[ 95.836151] (stk) :ldisc_install = 0
[ 96.948272] (stk) :ldisc_install = 1
[ 97.955230] (stk) :line disc installation timed out
[ 97.955230] (stk) :ldisc_install = 0
[ 98.953063] Bluetooth: st_register failed -22
[ 99.058044] (stc): st_register(4)
[ 99.061492] (stc): chnl_id list empty :4
[ 99.065887] (stk) : st_kim_start
[ 99.219207] (stk) :ldisc_install = 1
[ 100.242736] (stk) :line disc installation timed out
[ 100.246032] (stk) :ldisc_install = 0
[ 101.398986] (stk) :ldisc_install = 1
[ 102.401580] (stk) :line disc installation timed out
[ 102.401580] (stk) :ldisc_install = 0
[ 103.633270] (stk) :ldisc_install = 1
[ 104.636444] (stk) :line disc installation timed out
[ 104.641876] (stk) :ldisc_install = 0
[ 105.772521] (stk) :ldisc_install = 1
[ 106.787536] (stk) :line disc installation timed out
[ 106.808898] (stk) :ldisc_install = 0
[ 107.898986] (stk) :ldisc_install = 1
[ 108.923187] (stk) :line disc installation timed out
[ 108.923187] (stk) :ldisc_install = 0
[ 110.077026] (stk) :ldisc_install = 1
[ 111.094024] (stk) :line disc installation timed out
[ 111.094024] (stk) :ldisc_install = 0
[ 112.219360] Bluetooth: st_register failed -22
[ 112.389495] (stc): st_register(4)
[ 112.398101] (stc): chnl_id list empty :4
[ 112.398101] (stk) : st_kim_start
[ 112.510833] (stk) :ldisc_install = 1
[ 113.507019] (stk) :line disc installation timed out
[ 113.507537] (stk) :ldisc_install = 0
[ 114.669189] (stk) :ldisc_install = 1
[ 115.667114] (stk) :line disc installation timed out
[ 115.672576] (stk) :ldisc_install = 0
[ 116.775939] (stk) :ldisc_install = 1
[ 117.821563] (stk) :line disc installation timed out
[ 117.826965] (stk) :ldisc_install = 0
[ 119.003784] (stk) :ldisc_install = 1
[ 119.999725] (stk) :line disc installation timed out
[ 120.004943] (stk) :ldisc_install = 0
[ 121.156707] (stk) :ldisc_install = 1
[ 122.190917] (stk) :line disc installation timed out
[ 122.190917] (stk) :ldisc_install = 0
[ 123.298187] (stk) :ldisc_install = 1
[ 124.301025] (stk) :line disc installation timed out
[ 124.304992] (stk) :ldisc_install = 0
[ 125.306518] Bluetooth: st_register failed -22
[ 125.411590] (stc): st_register(4)
[ 125.411590] (stc): chnl_id list empty :4
[ 125.419342] (stk) : st_kim_start
[ 125.535644] (stk) :ldisc_install = 1
[ 126.538757] (stk) :line disc installation timed out
[ 126.544036] (stk) :ldisc_install = 0
[ 127.648742] (stk) :ldisc_install = 1