Unable to ON beadaframe display with Pandaboard-ES

Discuss TI Beagleboard, Pandaboard, their related extensions and accessories
esky-sh
Posts: 1435
Joined: Sat Dec 20, 2008 4:21 am

Re: Unable to ON beadaframe display with Pandaboard-ES

Post by esky-sh » Mon Aug 05, 2013 8:01 am

Which Ubuntu release you were using? Could you please paste your serial console log here for further analysis?

esky-sh
Posts: 1435
Joined: Sat Dec 20, 2008 4:21 am

Re: Unable to ON beadaframe display with Pandaboard-ES

Post by esky-sh » Mon Aug 05, 2013 10:42 pm

Please provide serial logs. we need this info. to identify root cause. There are 3 additional i2c devices installed after kernel boot.
- PWM backlight support(driver pwm-beada)
- RTC support(driver rtc-beada)
- Touch screen support(driver tsc-beada)

BTW, you can still get those message, if you can use your usb mouse and keyboard. Open a terminal under Ubuntu desktop and dmesg.

esky-sh
Posts: 1435
Joined: Sat Dec 20, 2008 4:21 am

Re: Unable to ON beadaframe display with Pandaboard-ES

Post by esky-sh » Mon Aug 05, 2013 11:05 pm

Open a terminal under Ubuntu desktop and dmesg. Then we will get logs during kernel boot. BTW, the 3 device drivers will get installed after kernel boot. No additional files needed.

esky-sh
Posts: 1435
Joined: Sat Dec 20, 2008 4:21 am

Re: Unable to ON beadaframe display with Pandaboard-ES

Post by esky-sh » Mon Aug 05, 2013 11:37 pm

try2share wrote:Contd.. to previous post..
Please find the following link syslog file for the console messages..

https://docs.google.com/file/d/0B_q28_w ... 82bUE/edit
The kernel does not get updated successfully.
Linux version 3.2.0-1412-omap4 (buildd@shedir) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #16-Ubuntu SMP PREEMPT Tue Apr 17 19:38:42 UTC 2012 (Ubuntu 3.2.0-1412.16-omap4 3.2.14)

Please recheck the precedures of your upgrade.

esky-sh
Posts: 1435
Joined: Sat Dec 20, 2008 4:21 am

Re: Unable to ON beadaframe display with Pandaboard-ES

Post by esky-sh » Mon Aug 05, 2013 11:53 pm

You already chosed this one:

Precise Pangolin (12.04) Installation Instructions
1. Install Precise Pangolin (12.04) on your Pandaboard or Pandaboard ES
https://wiki.ubuntu.com/ARM/OmapDesktopInstall
2. Apply all the current Ubuntu updates and reboot.
apt-get update
apt-get upgrade
3. Install kernel debs for Beadaframe supports
dpkg -i linux-headers-3.2.0-1412_3.2.0-1412.16_armhf.deb
dpkg -i linux-headers-3.2.0-1412-omap4_3.2.0-1412.16_armhf.deb
dpkg -i linux-image-3.2.0-1412-omap4_3.2.0-1412.16_armhf.deb
4. Flash kenel and reboot
flash-kernel

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests