Pre-requirements
- A Raspberry Pi mini PC
A BeadaPanel display kit
A Micro USB cable
1. Power on your Raspberry Pi mini PC
2. Connect BeadaPanel to Raspberry Pi by a Micro USB cable
3. BeadaPanel will be automaticaly recognized as a USB mass storage device by Raspberry Pi
Code: Select all
pi@raspberrypi:~ $ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 9.1G 0 disk
├─sda1 8:1 0 43.9M 0 part /media/pi/boot
└─sda2 8:2 0 4.9G 0 part /media/pi/rootfs
mmcblk0 179:0 0 7.4G 0 disk
├─mmcblk0p1 179:1 0 43.9M 0 part /boot
└─mmcblk0p2 179:2 0 7.4G 0 part /
pi@raspberrypi:~ $ ls /media/pi/boot/bpd
bpd
Code: Select all
pi@raspberrypi:~ $ sudo cp /media/pi/boot/bpd/bpd /usr/bin
pi@raspberrypi:~ $ sudo chmod +x /usr/bin/bpd
pi@raspberrypi:~ $ sudo bpd
BeadaPanel Daemon Ver. 1.0
Code: Select all
$ sudo nano /etc/rc.local -> add new line before "exit 0" with "/usr/bin/bpd &" without quote
$ sudo reboot