Hello everybody and thanks for your help in advance. Can anybody kindly point me to a u-boot that can handle the 256Mb NAND of the mini2440 because i've been searching and trying everything i could find with no luck for the past two weeks .
Thanks guys
u-boot issues
Re: u-boot issues
Hi driftking47007,
visit the following page : https://sites.google.com/site/belina76/android-booting
The author shares his experience of running Android on his mini2440.
Please note what the author says in the "Install u-boot to Mini2440" section :
"If you go to the Git repository of the u-boot for Mini2440, it is a version of 02/02/2010, with the notes: "MINI2440: Updated early nand loader". I have tried several others, that did not work..."
The given instructions seem to work with a 1024Mb NAND Flash.
I have downloaded and compiled this version of U-Boot this afternoon : it also works for my mini2440 with a 64Mb NAND Flash ! (For the moment, I have only tried to run U-Boot from RAM).
Hope this helps...
visit the following page : https://sites.google.com/site/belina76/android-booting
The author shares his experience of running Android on his mini2440.
Please note what the author says in the "Install u-boot to Mini2440" section :
"If you go to the Git repository of the u-boot for Mini2440, it is a version of 02/02/2010, with the notes: "MINI2440: Updated early nand loader". I have tried several others, that did not work..."
The given instructions seem to work with a 1024Mb NAND Flash.
I have downloaded and compiled this version of U-Boot this afternoon : it also works for my mini2440 with a 64Mb NAND Flash ! (For the moment, I have only tried to run U-Boot from RAM).
Hope this helps...
Re: u-boot issues
driftking47007,
I forgot to mention that I had to comment the following line in include/configs/mini2440.h :
//#define CONFIG_USE_IRQ 1 /* Needed for USB device! */
Without this modification, U-Boot doesn't run from RAM (instruction gathered from http://bill.station51.net/index.php?pos ... n-Mini2440)
best regards.
I forgot to mention that I had to comment the following line in include/configs/mini2440.h :
//#define CONFIG_USE_IRQ 1 /* Needed for USB device! */
Without this modification, U-Boot doesn't run from RAM (instruction gathered from http://bill.station51.net/index.php?pos ... n-Mini2440)
best regards.
-
- Posts: 6
- Joined: Fri May 28, 2010 10:35 pm
- Location: Italy
- Contact:
u boot issues
Did anyone find a blue boot bag containing a pair of blue trainers at Hirst Lane on Sunday 30th Oct?
If so, could you please ring Steve Gatenby on 01274 596967.
If so, could you please ring Steve Gatenby on 01274 596967.
Who is online
Users browsing this forum: No registered users and 6 guests