www.esky-sh.com

I have 3 displays with my mini2440 board: LCD_T35, LCD_L80 and LCD_A70.
With LCD_T35 display everything is fine, but when I'm running OS image for other I have problems with calibration of touch screen. If I recalibrate the screen, it works fine.

Where calibration configuration are stored? Or how to change them?

I need to have screen calibrated after the boot, but not calibrate it manual

problem solved

please say us how you solved the problem, brother

pub20 wrote:problem solved

1. calibrate manually
2. read the registry of the device for the calibration data
3. edit the platform.reg file with the calibration data from #2

Done.