How to Write Disk Image to a TF Card via Win32DiskImager

[esky-sh]

1. Do some prerequisite steps -->https://www.esky-sh.com/bbs/viewtopic.p ... 3774#p3922
2. Download Win32DiskImager
https://win32diskimager.org/
3. Run Win32DiskImager
4. Choose first drive letter of the TF card, in this case, it is 'F'
5. Click 'Write'
6. Click 'Yes'

ppp.png (70.57 KiB) Viewed 101150 times

[esky-sh]

Windows always does not treat TF card well which was with multiple partitions on it. So we need to erase those partitions as prerequisite steps, before we write a real disk image to it.
1、Install and open SD Card Formatter
https://www.sdcard.org/downloads/formatter/

ff1.jpg (55.18 KiB) Viewed 79683 times

[esky-sh]

2、Choose one of the drive letter which belong to this TF card.

ff2.jpg (79.49 KiB) Viewed 79682 times

If there are multiple drive letters belonged by this TF card in the system, you can select any one of them. Note that you MUST NOT select other drive letters that do not belong to this TF card. If you make a wrong choice here, you will lose all the data in this drive letter. If you are not sure about the exact meaning of this step, STOP immediately! We are not responsible for any data loss caused by wrong operation.

[esky-sh]

3、Choose quick format and click 'Format'

ff3.jpg (53.5 KiB) Viewed 79682 times

[esky-sh]

4、Click Yes

ff4.jpg (39.49 KiB) Viewed 79680 times

[esky-sh]

5、Click Ok

ff6.jpg (67.04 KiB) Viewed 79680 times